1. Record the movie back onto a DV camera - one of the options in the Movie Tasks #3 is "Saving to DV camera".
2. Connect the camera to the VCR as shown below.
 |
3. Place blank
tape (or tape you want to add to or record over) into the VCR.
4. Make sure the tape with the movie is in the camera. 5. Set the VCR input selector to Video 2 (using the remote) if you have connected as pictured. 6. Set the power switch to VCR on the camera. 7. Play back the recorded tape on the camera. 8. Start recording on the VCR. 9. When finished recording, STOP both the camera and the VCR. NOTE: Refer to the user manuals for other equipment models - use this as an example. |
Copy
from VHS to camera - please follow Copyright Guidelines
1. Connect the split cable from the camera to the output jacks on the VCR in the
back.
2. Put a blank tape (or a tape you want to add to or record over) into the
camera.
3. Put the already recorded tape into the VCR.
4. Set the power switch on the camera to VCR.
5. Simultaneously press the Record button and the button to its right on top of
the camera.
6. Press play on the VCR. You
should see the picture from the VCR on the camera screen.
7. When finished recording, STOP both the camera and the VCR.
Last updated March 04, 2005 ~ Mrs. K. Bradley